Skip to main content

Learning Photoshop Basics

Part 1 Files and instructions 

 For Image Production, I am learning photoshop. 

Right now I am doing the basics of photoshop which is mainly setting up photoshop, how the workspace works, customizing it, changing the way it works, experimenting on the adjustment tab with different brightness settings and contrast settings. There is a lot of things in photoshop for everyone that is for Painting, Graphic, Web, Art, and more. 

I have done photoshop before. I find it to be the most difficult mainly because there is a lot to learn in photoshop. So I'm glad that we did this lesson as it's a good way to remember the basics of photoshop.




Layer Layout Panel

My layout on Photoshop 


Workspace Test Layout





Part 2 introduction to selection files and instructions 

Zoom tool

For Part 2 I was mainly getting used to the photoshop workspace. I was instructed to download a file which is a birthday card and flooring along with the instructions to finish the card itself. In part 2 I had to learn how to use the zoom tool which is an easy tool to use, all you have to do is to click on the zoom tool from the tool panel which looks like a magnifying glass or you use cmd+zoom on the keyboard to use it. you can also use the Option key (Mac) so that the Zoom tool pointer appears with a minus sign in the center of the magnifying glass, and then click anywhere in the image and then release the Alt or Option key. 

There's also the scrubby option for the zoom tool. The scrubby option for zoom allows you to enlarge the area you enclosed in your rectangle which will now fill the entire image window.



Zoom tool 

    
Scrubby Zoom 






Brightening an image 

For the next task, I had to brighten an image. I have done this many times and there are a few ways you can do this:

  1. Navigate your cursor to the top of the page at the top bar (file, edit, image, etc) from there you would want to select an image. When that happens a menu will pop down with many options for you to choose from. what you want to focus on is the option called is Adjustments. from there select Brightness/Contrast to open it up. 
  2. On the bottom of the layer panel, there is a small circle icon that both halves are different one is black and the other is white. Click on the icon and a menu will pop up with many options.  Select Brightness/Contrast to open it up and it becomes a layer. 
  3. Finally, you can just select the Adjustment tab next to the layer panel to access the Brightness/Contrast option. 
However, there is one difference between option 1 and option 2. With option 1 you won't get a Brightness/Contrast layer it will instead be on whatever image you have chosen. if you are not happy with the results you could always select cmd+Z to remove the option. With option 2 when selecting the Brightness/Contrast option you would then create a layer. 

Option 1  

Step 1

                            




Step 2

















Step 3



Option 2



Step 1





Step 2






Step 3





Option 3


Step 1







Sampling a colour

when sampling a colour it's best to use the eyedropper tool. With the eyedropper tool, you can sample a colour from the image that you have working on photoshop. It's pretty straight forward all you have to do is move your cursor to the tool section and look for the eyedropper tool which looks like a dropper icon. Another way to select the eyedropper tool is to simply press I on the keyboard to select it. 

EyeDropper tool



Eyedropper circle




Selection tool

For chapter 3 I would have to test out the selection tool and the magic wand. I was given a file to work on to try to complete the task and learn how to use the selection tool and the magic wand tool. The file contained some random images that I had to move into the correct position, the image is down below



 
In the image, you can see some blank spaces above the objects. to move them I used the magic wand to select the object and I also used a bit of the quick select tool as well on the tools panel to select the object and I would then use the move tool to drag the object to the correct spot. For one object that I had selected, I had to transform the object, basically, I had to change the angle of that certain object to match up with the blank spot above. To use the transform option just press cmd+T to select the object that you want to transform. When you are finished with the transform tool just select the move tool on the tool panel and you are done. 


Results 




Part 3 Introduction to layers, files, and instructions 


For part 3 I had to sort out some layers of the statue of liberty. This was pretty easy to do, it's much like a jigsaw puzzle where you have to arrange them all to form a picture of the statue of liberty.


In this photo you can clearly see that there is a lot of pieces that form up a picture. On the right is where all the layers are, the layers contain the images that i have to rearrange. i can also toggle the layer on/off to see how they can meet up and fit together. during the process of arranging them together there were faint white lines which meant that they were not properly stuck together, the solution for this is to use the arrow keys to fix it by lightly tapping them until the white lines disappear. 





As you can see this is the final result of the image altogether in place. 



John File


For this file I had to select half of a guy's face using a cut-out tool to cut half of the face then I would then copy and paste it.





Once I had that done I would then have to click on the edit tab and click on transform to transform the layer by flipping it to the other to form a weird face. 




As you can I just did that and you can see what i was on about with the weird face. I was also asked to do it again but this time I had to do the other side which was pretty easy to do and you can see below the differences in what I was talking about.








Part 4 Independent Learning files and instructions


For part 4 I am focusing on the layers panel, learning how to isolate the different parts of an image of a layer. each layer can be edited as artwork giving you a lot of flexibility as you compose and revise an image. 

The first thing that I had to do was to set up the document that I was given to work on. the first thing that I did was to open up a program called Adobe Bridge. I have never really used that much Adobe Bridge, so I was told to open it up and select the folder that I was working on and I had selected the content in the file which was a pineapple. 



In Photoshop I was tasked to make sure everything was in place to move on to the next step. This means making sure that I had the layers panel open and ready. I was even told how to open the layers panel by selecting the windows option above the workstation which you can see below I was also asked to save the pineapple and rename it to 04Working.psd.



Once I was done with that I was then told that I would have to open up a new document. The document was called Beach.psd and after I had opened it up I would then have to rename the layer known as layer 1 and change it to simply Beach. 








Once I had that done I then had to drag the layer into the working document window which contained the pineapple. I would then have to toggle the pineapple layer off to reveal the beach layer underneath. 



Adding a border to a layer


Once I had that done I would then need to add in a white background around the beach layer mainly to have it look like an old photograph. To do this I would have to select the beach layer from the layers panel. Once selected I would then go above at the top of the workstation and select the layer tab to reveal a dropdown menu from above, from there I would have to hover on layer styles and another menu will appear. Finally, I would then select the stroke which would then reveal a box with many options to customize the borders.





With the box opened up, I had to customize the settings to set up the border for my photograph of the beach layer. The settings that I had to use are listed down below which are:

  • Setting the size point at 5px
  • The position on the inside 
  • The blend mode is Normal
  • Having the opacity at 100%
  • The Colour would then have to be white colour from the colour box

Once i have done that i would hit ok and i would then get a white border around my image.







Rearranging Layers

For this to work i would habe to select all the layers and make them visable and stack them in the correct order. To this i would need to postion the beach layer between the Pineapple and the Flower layer. 







Changing the opacity of a layer and copying a layer and changing the blending mode.


For this i would need to select the postage layer and change the opacity down to 25%. Finally for the last bit i would have 


93 page moodle 












 

Comments

Popular posts from this blog

Cactus

  Cactus Instructions  For this class, had to work on a cactus file that was given to me to work on. I would be working with the select and mask tools to help me get started with photoshop. The first thing that I would have to do is to go on moodle and download the file with the cactus into photoshop. Once I had done I would then be required to make a rough selection of the plant by using the quick selection tool and I would be able to add some selection or subtract from the selection if it was too much. Once i had finished my rough selection of the catcus i would then have to select select and mask from the option menu above upon doing this i would then be greeted with a properties menu which would tell me to pick a view mode which there are several such as: Marching Ants Overlay On Black  On White Black & White  On Layers  Reveal Layers  There are other selections as well that come within the properties panel: Edge Detection  Global Refinements...

Portrait Lighting & Post Production

For this lab my task was to focus on creating 5 portraits using the following lighting styles which are called: Split - Split lighting is a lighting technique that would light up half of the subjects face while leaving the other half as shadow, basically splitting the face. The splitting effect can be achieved by the light source that is perpendicular to the subject illuminating from the other side.   Broad - Broad lighting is a type of lighting that photographers use mainly for portrait photography. With this lighting effect achieved the light would then illuminate the broad side of the subjects face in front of the camera. Butterfly - Butterfly lighting is a lighting pattern that is mainly used in portrait photography where the key light is placed above and pointing down at the subjects face. This creates a dramatic shadow under the nose and chin that will look like a butterfly.  Rembrandt - Rembrandt lighting is a lighting technique that utilising one light and one reflecto...

Lab 8 Product Shot

Task  For this lab it's pretty much like last week. Only this time I'm picking another object or in this case multiple objects. These objects that I have chosen leans towards my art hobby. I have chosen ink bottles or mainly multiple colours of ink.  This lab was for me was not great me at all.  I mean trying to focus on getting the shots in the same Environment as the first product shot that I was doing was hard mainly because the ink bottles were too small and it was hard to focus on some of the shots as it was very blurry.  Attempt 1 The images are too blurry and too dark also they are very bright as you can see above and very hard to focus on.  Attempt 2 These shots came out okay. But not the best as you can see above. I will be sticking with the first product shot which are my headphones as I had way more fun using them rather than struggling with the ink bottles